Lightronics XC40 Manual de usuario descargar pdf (Pagina 6)

Page 6 of 16

XC-40 COMPACT DMX DIMMER

Version 0.3 OWNERS MANUAL 02/21/2008

www.lightronics.com 20080221 drp

Lightronics Inc. 509 Central Drive Virginia Beach, VA 234354 757 486 3588

Push MENU/NEXT to advance to the next channel

or hold down MENU/NEXT for aprox. 5 seconds to.

exit back to the display (

PACA).

CHASE OPERATION

The XC-40 can run one of 16 chase patterns which

can be selected from the

CHAS menus. The rate,

fade time, and brightness of these patterns may be

controlled by the user. These settings apply to ALL

chase patterns.

The sYst, CnFG menu, which selects the dimmer

control source, must be set to

chAS in order to run

chase patterns.

SELECTING CHASE PATTERN 00 TURNS OFF

CHASE OPERATIONS.

SETTING CHASE PATTERNS AND PARAMETERS

Hold MENU/NEXT for aprox. 5 seconds to access

the menus. The display will show

dSEt.

CHASE PATTERN SELECTION

Push MENU/NEXT until the display shows

CHAS.

Push SELECT. The display will toggle between

ChPt and the currently selected chase pattern

number.

Use to set the desired pattern number. Push

SELECT to save the change.

Push MENU/NEXT to move to the next chase

parameter (chase rate).

CHASE RATE

The chase rate is actually set by selecting a step

duration time. This time is shown on the display in

1/4 sec. increments. Therefore a 1 chase step per

second rate will show as setting of 4 on the display.

The display will toggle between Chrt and the

current chase rate.

Use and to set the desired chase rate.

Push SELECT to save the change.

Push MENU/NEXT to advance to the next chase

parameter (Chase Fade).

CHASE FADE

The display will toggle between ChFd and the

current fade setting (% of the step time). Times of 0,

25,50 and 100% are available.

Use to set the desired fade time. Push SELECT

to save the change.

Push MENU/NEXT move to the next chase

parameter (chase brightness).

CHASE BRIGHTNESS

The display will toggle between Chbr and the

current chase brightness level (0 = 100%).

Use to set the desired brightness. Push

SELECT to save the change.

Hold MENU/NEXT for aprox. 5 seconds to exit

from the menus.

SYSTEM SETUP

The system setup menu (SYSt) controls how the

overall dimmer pack is configured. The

SYSt menu

has 5 submenus:

CnFG, Log-, ScEn, ArcU,

and Pwr

CONTROL SOURCE SELECTION (CnFG)

The CnFG menu selects what source will control the

dimmer pack. The 6 choices are:

1. Normal wired DMX (5Pin)

2. Stand alone chase (

chAS)

3. Local (

LocL)

4. Architectural Station (

Arch)

5. RS485 (

r485)

6. Wireless DMX (

Antd)

ChPt 01

Chrt 004

ChFd

100

Chbr 100

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comentarios a estos manuales

Sin comentarios

Lightronics XC40 Manual de usuario Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Lightronics XC40