Lightronics XC40 Manual de usuario descargar pdf (Pagina 12)

Page 12 of 16

XC-40 COMPACT DMX DIMMER

Version 0.3 OWNERS MANUAL 02/21/2008

www.lightronics.com 20080221 drp

Lightronics Inc. 509 Central Drive Virginia Beach, VA 234354 757 486 3588

XC-40 AND SMART REMOTES CONNECTORS

SMART REMOTES CONNECTOR DETAILS

The diagram below shows the signals for the 4 Pin,

smart remotes connector.

XC-40 CONNECTOR DETAILS FOR REMOTE USE

The diagram below shows the signals for both of the

5 Pin XLR connectors when used with smart remotes.

UNIT ADDRESS ASSIGNMENT

The smart remote connection bus used with XC-40s

must have a single controlling (master) unit on it.

Assigning the master unit on the bus is accomplished

by setting unit addressess for the dimmers.

When using only one XC-40 with smart remotes

control, the unit must be set to UNIT ADDRESS 00.

If multiple XC-40s are used then one of them (and

ONLY one of them) must be set to UNIT ADDRESS

00. The remaining units may be set to any other unit

address. It is recommended that they be set to

consecutive numbers starting at 01 for future use.

TO SET THE UNIT ADDRESS

Hold MENU/NEXT for aprox. 5 seconds to access

the menus. The display will show

dSET.

Push MENU/NEXT until the display shows

SYSt.

Push SELECT. The display will toggle between

CnFG and the currently selected control source.

Push MENU/NEXT until the display toggles

between

ArcU and the current unit address number.

Use and to change the unit address number. Then

push SELECT to save the selection.

Hold MENU/NEXT for aprox. 5 seconds to exit

from the menus.

CREATING AND SAVING SCENES

Scenes to be activated by an XC-40 dimmer must first

be created and stored (recorded) in the dimmer pack.

Scene recording stores the current intensity levels of

all four channels in the unit regardless of how they

were set.

Intensity levels can be set using only the dimmer, in

the local mode, or by operating the unit with a DMX

console. Each scene created has an associated user

settable fade time.

CAUTION

REMOVE ALL POWER FROM THE XC-40

BEFORE MAKING OR CHANGING SMART

REMOTE CONNECTIONS.

REMOTE COMMON

REMOTE DATA -

REMOTE DATA +

REMOTE V+

MALE

5 PIN

XLR

FEMALE

5 PIN

XLR

REMOTE COMMON

REMOTE DATA -

REMOTE DATA +

NOT USED

REMOTE V +

SIGNAL

PIN #

rcU 00

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios

Lightronics XC40 Manual de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Lightronics XC40